Namsan Pet Screen Door, Dog Door for Sliding Door, 12x16 Inches Doggy Door for Screen Door, Magnetic Close Cat Door Window Porch, Large, Black

I repaired my parents' sliding screen door that had this exact pet door in it. My Dad had installed it flush with the side and bottom and the screen was starting to tear and the two sides of the door popping as some have said. When I repaired the screen I installed the door per the instructions. I made sure the door was taller than the shoulders of the dogs, which put it at least 5 inches up from the bottom. Installation went very smoothly. As others have suggested I did glue the door. I used 527 adhesive and put dabs on each pin and hole before snapping the two sides together. I did tap gently with a tack hammer to make sure both sides were snapped together tightly. My parents are pleased with the result and the dogs are happy they don't have to duck and slink through the door anymore.

And I'm happy to report that the installation of this dog door WAS A BREEZE.I don't understand why I saw so many reviews about how difficult this door was to install. It honestly could not have been easier, and my wife and I were able to install it in about 15-20 minutes. Not only were we able to install it very quickly, but we didn't use a drop of glue, nor did we have to use the zip ties that come in the package. Here's how we did it:1. Separate all the pieces with a flathead screwdriver. Pull the two ball shaped pieces off of the frame of the door, they are meant to be removed.2. Have someone hold up half of the frame against the screen in the location you're looking to install it. The second person should be on the other side of the screen with a box cutter. Use the box cutter to make tiny holes in the screen at all of the inserts on the frame that person 1 is holding. You should also make little holes for all of the pegs that are attached to the frame.3. Grab the other half of the base, and snap it together through the little holes in the screen that you just made. That's it, frame is installed. No glue, no zip ties, and the hold seems to be pretty firm.4. Take the box cutter, and cut the screen out of the inside of the frame. Take that piece of screen and snap into the inner frame piece that you haven't installed yet. Snap the inner-frame into the outer-frame to make the swinging door, and viola, you're done.5. The little balls can be used to lock the door flap if needed.Again, this installation couldn't have been easier. The door works well, and has been handling the impact of my blind, 90 pound lab very well. If you're looking for an easy-to-install dog door, look no further.

I live in south Florida and needed a doggie door suitable for use on my lanai that would fit my large dog. And this door worked perfectly! It does have an issue. It does not stick together well. I drilled a hole in each corner and added a screw to keep it secure.

The media could not be loaded. UPDATE July 24- Poor quality. This has completely broken in under 6 weeks. Very disappointing. I would not purchase this again. We have a 60lb German Shepherd female who is 10 months and growing. It looks like it’ll still fit her when she’s full grown.Very easy installation.Magnetic catch at the bottom ensures the flap stays shut.Took a little training with treats and praise but she learned pretty quickly.It looks nice too. Hubby is impressed.So far so good. I’ll update if anything changes.Breakdown of how I installed it:First pull apart the two pieces.Then I lined up the one side where I wanted it and pushed the sticking out pieces of the “snaps” through the screen on one side. I rubbed a Phillips screwdriver over the point to weaken the screen and popped the point through.After that, I twisted the screwdriver in the holes/divots so the points on the opposite panel would easily click through.It was a little finicky putting the other panel on because the snaps needed some help - I used the back of the screwdriver to tap it together.Once most of the snaps were connected, I cut the screen on the sides and the bottom.It was easier to connect the snaps better once the swing door portion was cut.Once that was done, I cut the slits for the cable ties which are used for extra stability.I installed right next to a door so it made it easier to work both inside/outside with ease. Otherwise it would be a two person job.Tried to be a thorough as possible as I didn’t find much info showing how this would be with a bigger dog.

Cats run in and out of screen door all day and it does not fall off! easy to install and has screws to ensure stability in the screen. perfect size for cats/small dogs! Swings open with ease and does not tear screen

Sehr gut und leicht zu montieren

Die Kater haben noch nicht ganz raus wie es funktioniert, aber ich bin froh dass sie so die Möglichkeit haben rein und raus zu flitzen ohne dass man den ganzen Tag einen Türstopper in die Tür stellt.Kommt zumindest schon einmal gut an und hält wie abgebildet was es verspricht.

Ma chienne n’a pas mis longtemps à comprendre son utilisation. Montage facile seule

j ai prit le plus gros format celui ou l on voit une labrador sortir ,en aucun cas un labrador peut sortir par cette ouverture ,moi c est mon shih tzu qui sort et franchement y a rien de trop