🎶 Elevate Your Audio Experience!
The Mounting Dream Speaker Stands are height-adjustable, sturdy, and designed for satellite and small bookshelf speakers, accommodating up to 11 lbs. With a sleek design and effective cable management, these stands enhance both sound quality and home aesthetics. Perfect for any audio enthusiast looking to optimize their setup.
Base Width | 9.8 Inches |
Maximum Height | 42 Inches |
Item Weight | 11.6 Pounds |
Item Dimensions L x W x H | 42"L x 9.8"W x 42"H |
Material Type | Alloy Steel |
Finish Types | Powder Injection |
Color | Black, Other colors might be available |
Load Capacity | 11 Pounds |
Fit Type | Over-Ear |
J**Y
Great for the Nakamichi Dragon surrounds
Why did you pick this product vs others?:I bought the Nakamichi Dual 12" Dragon system, but the surround Dragon stands weren't available, so I tried these. These were rated at holding 11 pounds. The dragon surround speakers weigh 9 pounds. They work GREAT!! The only issue was the speaker mounting holes. I would have to drill a custom hole in the stand to use the 2 screw holes in the Dragon surrounds. With the bracing that comes with the stands just 1 screw seems to hold the Dragon speaker very well. I also think these stands are udder rated at 11 pounds. They are VERY sturdy. The stands come with rubber screw-in feet but also have carpet spikes in the parts bags if needed. I'm using the rubber feet. The adjustable height is another feature that the Dragon stands don't have.
R**D
Way better than I thought they'd be
Amazing stands. I was hesitant at first because of the price, but they really are worth it. They're sturdier than I thought they would be and the adjustable height is a huge bonus for sound elevation if that's something you need. Definitely recommended.
P**S
Easy
This was easy to put together and does the job for my Samsung Q990D setup. The only thing is that the plugins are too fat for the pipe so you'll have your wire outside. To me that is not a big deal & also not the stand's fault.
S**A
Nice looking stand with build quality issues
Everything besides the welding to the base of the stand was good. The small metal circle at the base was welded too high which prevents the 1st part of the stand from screwing in correctly since the holes don't align. I manually fixed the base by hammering it which took a long time. Also missing documentation for 1/4 in screws and only has documentation for M4 and M6 screws.
A**T
Fits Samsung Rear Speaker kit.
These stands were solid and easy to install. Only issue, base “A” to Post “B” the holes didn’t line up as easily as the other stand. But my Samsung 9500rear speaker kit fit well!
C**.
Works as expected
Works pretty great with the Q990D rear surrounds. You just need to make sure you have some washers laying around so you tightly secure it, although in reality you probably don't need to worry about it since they don't seem to move much without being fastened down.
J**E
Sturdy Speaker Stands
After about 30 minutes of assembly time I was able to set my surround speakers up. My wife was pleased with the look of the stands so all good there. I removed the foot pads and replaced them with carpet spikes and honestly that took the most time. I measured so each spike was the same height as all the others and the stands sit well in the carpeted floor. The two tubes are screwed in place with hex screws with a screw knob in the middle of both tube to adjust the speaker height. I have them extended all the way to the max height of 42 inches -- which puts the rear surround speakers at a nice position above the back of the sofa. The speaker power wire is run through the back of the top tube and exits out the bottom. The resultant look is clean and the stands hold the speakers securely. The stands come in a powder coat finish so they look to be scratch resistant.As far a tip-resistance goes, I am sure you can knock them over with a heavy blow but otherwise the wide base makes them somewhat immune from easily tippling over. If tip-resistance is important to you then I recommend adding some lead weights in the base to give the stands more weight. I don't think that is really necessary. I tried to tip them over with increasingly stronger pushes and I was satisfied that under "normal" conditions they won't easily tip over.My only suggestion to the manufacturer is that instead of the knob to adjust height you should just supply another hex set screw which makes for a cleaner look. Once set I do not plan on changing the height.Really nice speaker stands. Highly recommended.
O**O
Fits the q990c rears great!
Really nice stands for the price. Super sturdy. Had no issues attaching the q990c rear speakers to these.
Trustpilot
3 days ago
2 days ago